Tugas Akhir
Semi-automatic plate and pipe rolling machine performance test: case study at CV. Akar Mandiri Sidoarjo / Ferry Nanto
Abstrak
Abstract Semi-automatic plate and pipe rolling machine is an innovation development in the manufacturing world where this machine is the result of a combination of two machines that are made into one machine. The manufacture of this machine is based on the problems that exist in CV.Akar Mandiri Sidoarjo which requires a plate rolling machine and a pipe rolling machine but is constrained by a limited place or location for storing the machine so that the idea arose to make one machine but has a dual function. This study aims to test the performance of the developed semi-automatic plate and pipe rolling machine. Test variations include several main aspects namely processing time energy consumption and rolling results. Plate rolling tests were carried out using strip plate material with a thickness of 1 mm 2 mm 3 mm and 4 mm with a diameter formation of 300 mm and 400 mm while pipe rolling tests used pipes with a thickness of 1.5 mm 2 mm 2.5 mm and 3 mm with a diameter formation that must be achieved 200 mm and 300 mm. After testing the test data was analyzed to determine the performance of the machine the results of this semi-automatic plate and pipe rolling machine are able to roll plates with a thickness of 1 mm 2 mm 3 mm and 4 mm to a diameter of 300 and 400 with a time of 260 seconds to 400 seconds at a diameter of 300 mm and 160 to 260 seconds at a diameter of 400 mm with an average energy consumption of 300 to 315 watts. In rolling pipes of 1.5 mm 2 mm 2.5 mm and 3 mm the average time required to reach a diameter of 200 mm is around 560 to 900 seconds and at a diameter of 300 it takes 400 to 800 seconds with an average energy consumption of 305 watts to 315 watts. the results of plate and pipe rolling have a very good accuracy value with a value of 99% which means that this semi-automatic plate and pipe rolling machine is able to produce precise rolling results.