Tugas Akhir
Voltage and current simulation on inverter module based electric motor / Wulan Widartiningsih
Abstrak
Widartiningsih Wulan 2025. SIMULATION OF VOLTAGE AND CURRENT IN A MOTOR INVERTER MODULE-BASED ELECTRIC MOTOR Final Project Automotive Engineering Technology Study Program Faculty of Vocational Studies State University of Malang. Supervisor Ir. M. Ihwanudin S.Pd. M.Pd. This study investigates single-phase and three-phase inverters which are very important for current control systems especially for commercial and industrial applications. By converting direct current (DC) to alternating current (AC) the inverter can increase the speed and torque of the motor. The purpose of this research is to simulate current controllers with both types of inverters for finding and designing the most efficient control system and reducing possible errors before physical implementation. They will also compare their performance in different places. The problem formulation includes the problems encountered and the simulation design method. The purpose of the study is to find the problem and find the best way to solve it. This study examines the comparison of single-phase and three-phase inverters as well as important components of the electric motor system. Previous studies have shown that three-phase inverters are more efficient and stable than single-phase inverters at high loads. A simulated current control system with an inverter can also help in system design and optimization as well as finding problems before physical implementation. This study emphasizes the use of MATLAB and Simulink to analyze and visualize the dynamic system. Electric motors such as brushless DC (BLDC) motors controllers speed controllers batteries inverters and PWM modules are the theoretical components discussed. This research uses MATLAB Simulink R2013a to simulate the current control system of the electric motor. This research focuses on comparing the performance of three- phase half and full inverters. Furthermore the research process begins with reading the literature and determining the problem. Then the inverter is designed and the system input parameters are set. The simulation results show that the half and full inverter circuits are significantly different. The half inverter produces a smoother and more stable current wave than the full inverter. The three-phase simulation also shows good rotor and stator response and a steady increase in RPM. This study shows that choosing the right inverter circuit is critical to improving the performance of electric motors. The use of more sophisticated control systems such as adaptive fuzzy or PID control to improve the system response to load changes is a suggestion for further research.