UPT Perpustakaan UM

  • Beranda
  • Informasi
  • Repository UM
  • SIPADU UM
  • OPAC SIPADU

Pencarian Spesifik

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
No image available for this title

Tugas Akhir

Design of gui software control and calibration system on 3 axis cnc machine / Roihan Arya Ramadhani

Ramadhani, Roihan Arya Ramadhani - Nama Orang;

Abstrak
The problem of this research is the design of a control system for a 3-axis CNC milling machine. It addresses the design of a 3-axis CNC milling machine control system Mach3 software calibration and performance testing of the effect of spindle speed on workpiece surface roughness. This design aims to determine the relationship between spindle speed parameters and machining quality and control system performance. This research uses an experimental method with a quantitative approach to the design of the control system and the calibration of the GUI software for a 3-axis CNC milling machine. This research was conducted by designing a control system calibrating Mach3 software and analyzing the effect of spindle speed on the workpiece. Data collection results were analyzed for dimensional accuracy and surface roughness using a dial indicator and roughness tester. The design results showed a successful 3-axis CNC control system integrating hardware (stepper motor driver limit switch spindle) with Mach3 software for precise control of the X Y and Z axes. Mach3 calibration through setting steps per unit motor direction and limit and home switch functions ensured G-code accuracy. Surface roughness (Ra) testing showed average results of 1.2-1.3 micro m for aluminum 1.8-2.3 micro m for nylon and 2.4-2.8 micro m for bakelite.


Informasi Detail
DDC
-
Prodi
Universitas Negeri Malang. Program Studi Teknologi Rekayasa Manufaktur, 2025.
Deskripsi Fisik
-
Bahasa
No Reg
0088/TA/25
Edisi
Tugas Akhir (Diploma)--Universitas Negeri Malang. 2025
Subjek
1. MESIN CNC (COMPUTER NUMERICAL CONTROL) - PERANGKAT LUNAK KONTROL
2. MACH3 (PERANGKAT LUNAK) - KALIBRASI
3. TEKNOLOGI REKAYASA MANUFAKTUR - MESIN FRAIS (MILLING)
4. CNC (COMPUTER NUMERICAL CONTROL) - CONTROL SOFTWARE

Pembimbing
1. Didin Zakariya Lubis, S.pd, M.eng
Lampiran Berkas
You must be logged in to get fulltext


UPT Perpustakaan UM
  • Berita

Tentang Kami

TIM IT Perpustakaan 2023

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS

Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik