Tugas Akhir
Static load analysis of 3-axis cnc milling machine / Ilham Ardiansyach
Abstrak
Static load analysis on a three-axis CNC milling machine is an important aspect in the design and operation of the machine to ensure optimal performance and safety during the machining process. This study aims to analyze the loads acting on a 3 axis CNC milling machine by considering various factors such as material type cutting tool geometry and machining parameters. The method used in this research is numerical simulation with Finite Element Method (FEM) implemented using Autodesk Inventor student version software. The main advantage of this method is its ability to predict the behavior of structures virtually without having to perform destructive testing on physical machines thus saving time and costs. The analysis process includes creating a detailed 3D model of the machine applying boundary conditions in the form of fixed supports applying loads (cutting forces) to the tool tip according to the results of analytical calculations for each variation of depth of cut and finally running simulations to obtain stress deformation and safety factor data. The simulation results show that the influence of forces on the X Y and Z axes on the structural integrity of the machine providing valuable insights to improve the design and operational efficiency of CNC machines as well as supporting the improvement of the quality of products produced in the manufacturing process. The static simulation results show that the CNC machine frame structure is able to withstand the forces acting. The simulation results show the strength of the lower frame of the three-axis CNC milling machine with a von mises stress value of 0.8005 Mpa max with a displacement value of 0.002913 mm max. in the upper frame simulation results get a von mises stress value of 1.243 Mpa max with a displacement value of 0.004699 mm max. in the end mill simulation using mesh 0.1 gets a von mises stress result of 0.7549 max with a displacement of 1.049e-04 mm max. and in the end mill simulation results using mesh 0.5 gets a von mises stress result of 0.73 Mpa max with a displacement value of 9.697e-05 mm max. In the simulation of bolt strength on the spindle the von Mises stress max with mesh 0.5 obtained a value of 3.715 Mpa with a maximum displacement of 1.34e-04 mm.