UPT Perpustakaan UM

  • Beranda
  • Informasi
  • Repository UM
  • SIPADU UM
  • OPAC SIPADU

Pencarian Spesifik

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
No image available for this title

Tugas Akhir

3d printer machine performance test double vertical frame / Moch Doni Ardiansyah

Ardiansyah, Moch Doni - Nama Orang;

Abstrak
ABSTRACT Ardiansyah Moch Doni. 2025. Uji Kinerja Mesin 3D Printer Double Vertical Frame. Tugas Akir. Jurusan Teknologi Rekayasa Manufaktur. Fafkultas Vokasi. Universitas Negeri Malang. Pembimbing (I) Ir. Didin Zakariya Lubis S.Pd. M.Eng. (II) Drs. Abdul Qolik M.Pd. (III) Dr. Windra Irdianto M.Pd. Keywords 3D printer double vertical frame PLA filament Taguchi method print quality. This study aims to evaluate the performance of a 3D printer machine designed with a double vertical frame structure in producing PLA-based prints. The double vertical frame design was chosen for its potential to enhance mechanical stability and reduce vibrations during the printing process thereby improving the accuracy and quality of the printed objects. The research method employed is Research and Development (R amp D) with an experimental approach using the Taguchi L9 Orthogonal Array design which examines three main parameters extruder temperature (190 deg C 200 deg C 210 deg C) printing speed (50 mm/s 75 mm/s 100 mm/s) and layer height (0.1 mm 0.2 mm 0.3 mm). These parameters were tested against three aspects of print quality surface roughness dimensional accuracy and mass. The experimental results showed that the optimal parameter combination was obtained at an extruder temperature of 190 deg C a printing speed of 50 mm/s and a layer height of 0.1 mm. This combination produced prints with the smoothest surface target-consistent mass and high dimensional precision. Structurally the machine frame exhibited a safety factor of 18 a maximum displacement of 0.107 mm and a Von Mises stress of 0.031 MPa indicating that the frame is sufficiently strong and rigid to support precision printing. Meanwhile the energy consumption for a 5-hour printing process was recorded at only 0.55 kWh demonstrating the machine rsquo s energy efficiency. The findings of this study are expected to serve as a reference for the development of locally produced 3D printers that are efficient precise and suitable for applications in education research and small-scale industries.


Informasi Detail
DDC
-
Prodi
Universitas Negeri Malang. Program Studi Teknologi Rekayasa Manufaktur, 2025.
Deskripsi Fisik
xi, 68 hlm. : ilus
Bahasa
No Reg
0096/TA/25
Edisi
-
Subjek
1. PENCETAKAN 3D - UJI KINERJA
2. METODE TAGUCHI - OPTIMASI PARAMETER
3. FILAMEN PLA - KUALITAS CETAKAN
4. TEKNOLOGI REKAYASA MANUFAKTUR - RANCANG BANGUN
5. 3D PRINTING - PERFORMANCE TESTING

Pembimbing
1. Didin Zakariya Lubis, S.pd, M.eng
Lampiran Berkas
You must be logged in to get fulltext


UPT Perpustakaan UM
  • Berita

Tentang Kami

TIM IT Perpustakaan 2023

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS

Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik