Tugas Akhir
Design and construction of a semi-automatic multifunction pipe bending machine / Ahmad Syahri Ulum
Abstrak
The vocational laboratory of the Manufacturing Engineering Technology Study Program plays an important role in supporting student practicums and research however it is currently facing limitations in both the number and types of machines as well as specifications that are not yet aligned with current learning needs. This study aims to determine the design of a semi automatic multifunction pipe bending machine beginning with the identification and analysis of its component layout and extending to the drive transmission mechanism. The technical calculations covering torque motor power and structural loads will be evaluated to ensure the machine rsquo s operational efficiency and reliability. The results of the study indicate that the machine was designed with a frame constructed from 50 times 50 times 5 mm angle iron a shaft made of AISI 4340 steel with a diameter of 35 mm and a 10 times 8 mm key a 3 phase AC motor rated at 2 HP and 1 400 rpm a WPO 70 gearbox with a 1 30 ratio and a drive system combining V belts and sprocket chains. All selected components satisfy the minimum torque requirement of 98.8 Nm and the minimum bending force of 941.9 N for 19 mm diameter pipes with wall thicknesses of 1.5 ndash 2 mm. The assembly stages include cutting welding of the frame machining of the dies and shaft installation of the motor gearbox and transmission system and finally painting. All procedures are carried out in accordance with the working drawings and workmanship standards.