UPT Perpustakaan UM

  • Beranda
  • Informasi
  • Repository UM
  • SIPADU UM
  • OPAC SIPADU

Pencarian Spesifik

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
No image available for this title

Tugas Akhir

Static and dynamic simulation analysis of a tobacco slicing machine with double roller system / Dhani Fadlillah

Fadlillah, Dhani - Nama Orang;

Abstrak
The tobacco slicing machine with a double roller system is a form of appropriate technology development designed to assist tobacco farmers in the slicing process particularly in Sraturejo Village Bojonegoro Regency. This study aims to evaluate the design of the The tobacco slicing machine with a double roller system focusing on the frame structure and the slicing blade. The research was conducted using an experimental method based on Computer-Aided Engineering (CAE) with a Finite Element Analysis (FEA) approach. The study was structured to investigate and analyze the structural behavior of the machine frame and slicing blade during the shredding process. The results of the static simulation analysis using CAE and theoretical calculations show that an increase in frame thickness reduces the von Mises stress and deformation while increasing the safety factor. In the static CAE simulation the safety factor was 8.8 at a frame thickness of 1 mm and reached a maximum of 15 at a frame thickness of 4 mm. The theoretical static simulation showed a safety factor of 4.924 at a frame thickness of 1 mm increasing to 15.673 at a frame thickness of 4 mm. In the dynamic simulation the maximum deformation was 0.0053 mm with a constant safety factor of 15 at 26.83 mu s. Therefore the frame of the tobacco slicing machine is recommended to use St 37 material with a frame thickness of 2 mm while the slicing blade made of HSS is considered feasible for use. These results serve as a technical basis for the design recommendations of the tobacco slicing machine with double roller system.


Informasi Detail
DDC
-
Prodi
Universitas Negeri Malang. Program Studi Teknologi Rekayasa Manufaktur, 2025.
Deskripsi Fisik
xiii, 107 hlm. : ilus
Bahasa
No Reg
0099/TA/25
Edisi
Tugas Akhir (Diploma)--Universitas Negeri Malang. 2025
Subjek
1. MESIN PERAJANG TEMBAKAU - ANALISIS SIMULASI
2. KONSTRUKSI MESIN - KEKUATAN STRUKTUR
3. TEKNOLOGI REKAYASA MANUFAKTUR - RANCANG BANGUN
4. TOBACCO CUTTING MACHINE - SIMULATION ANALYSIS

Pembimbing
1. Didin Zakariya Lubis, S.pd, M.eng
Lampiran Berkas
You must be logged in to get fulltext


UPT Perpustakaan UM
  • Berita

Tentang Kami

TIM IT Perpustakaan 2023

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS

Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik