UPT Perpustakaan UM

  • Beranda
  • Informasi
  • Repository UM
  • SIPADU UM
  • OPAC SIPADU

Pencarian Spesifik

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
No image available for this title

Tugas Akhir

Analysis of the effect of limit switch on angle accuracy and efficiency of semi-automatic pipe bending machine / Deo Fernanda Saputra

Saputra, Deo Fernanda - Nama Orang;

Abstrak
This study aims to analyze the effect of using a limit switch on improving angle accuracy and time efficiency in a semi-automatic pipe bending machine. Manual pipe bending often results in inaccurate angles due to machine limitations and operator control. To overcome this issue an innovation was made by integrating a limit switch sensor into the machine control system to achieve higher precision levels. The research method used is experimental with a quantitative approach where data was collected through direct testing of bending angle results under two conditions without a limit switch and with a limit switch. The pipe bending test was conducted using pipes with a diameter of 19 mm and thicknesses of 1 mm 1.5 mm and 2 mm targeting bending angles of 45 deg and 90 deg as well as evaluating time efficiency. The test results were compared to determine the influence of the limit switch on the accuracy and efficiency of the semi-automatic pipe bending machine. Based on the analysis the machine equipped with a limit switch demonstrated a consistent improvement in average angle accuracy achieving over 99% accuracy and a time efficiency increase of 40 ndash 46% compared to the machine without a limit switch. The higher and more consistent angle accuracy indicates better machine performance. Therefore the use of a limit switch in a pipe bending machine has proven to significantly enhance the quality and efficiency of the overall manufacturing process.


Informasi Detail
DDC
-
Prodi
Universitas Negeri Malang. Program Studi Teknologi Rekayasa Manufaktur, 2025.
Deskripsi Fisik
xi, 72 hlm. : ilus
Bahasa
No Reg
0100/TA/25
Edisi
Tugas Akhir (Diploma)--Universitas Negeri Malang. 2025
Subjek
1. MESIN PENEKUK PIPA - OTOMASI KONTROL
2. LIMIT SWITCH - AKURASI SUDUT
3. TEKNOLOGI REKAYASA MANUFAKTUR - EKSPERIMEN TEKNIK
4. PIPE BENDING MACHINE - AUTOMATION CONTROL

Pembimbing
1. Drs. Abdul Qolik, M.pd
Lampiran Berkas
You must be logged in to get fulltext


UPT Perpustakaan UM
  • Berita

Tentang Kami

TIM IT Perpustakaan 2023

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS

Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik