UPT Perpustakaan UM

  • Beranda
  • Informasi
  • Repository UM
  • SIPADU UM
  • OPAC SIPADU

Pencarian Spesifik

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
No image available for this title

Tugas Akhir

Hydraulic system analysis and performance test of semi-automatic plate bending machine / Dimas Mahendra Fernindian

Fernindian, Dimas Mahendra - Nama Orang;

Abstrak
This study aims to design implement and analyze the performance of a semi-automatic hydraulic plate bending machine powered by a powerpack system with a maximum force capacity of 13.87 kN. The machine was developed as a learning tool in vocational education environments particularly to understand the working principles of hydraulic systems and metal forming processes through the bending method. The research method includes the design of mechanical and hydraulic systems machine fabrication and performance testing based on parameters such as working time energy consumption and resulting bending angle. Tests were conducted on low carbon steel plates with thickness variations of 0.5 mm 1 mm and 2 mm and target bending angles of 90 deg 120 deg and 135 deg . Testing instruments included a stopwatch wattmeter and protractor. The results show that the machine can optimally bend plates up to 1 mm thick both for large and small-sized specimens. For 2 mm thick plates the machine was still able to bend small specimens (60 times 100 mm) because the shorter bending edge required less force which remained within the machine rsquo s capacity. However for large-sized plates (500 times 200 times 2 mm) the bending process failed due to the required force exceeding the machine rsquo s capacity which was calculated at 36.94 kN. The resulting bending angles matched the targeted values with minor deviations mostly occurring in thin plates due to springback effects. The average bending time ranged from 3 to 4 seconds while energy consumption during the process ranged between 722 W and 902 W depending on the plate thickness and bending angle variations used.


Informasi Detail
DDC
-
Prodi
Universitas Negeri Malang. Program Studi Teknologi Rekayasa Manufaktur, 2025.
Deskripsi Fisik
xi, 47 hlm. : ilus
Bahasa
No Reg
0107/TA/25
Edisi
Tugas Akhir (Diploma)--Universitas Negeri Malang. 2025
Subjek
1. MESIN PENEKUK PLAT (PLATE BENDING) - SISTEM HIDROLIK
2. TEKNOLOGI TENAGA FLUIDA (POWERPACK) - ANALISIS KINERJA
3. TEKNOLOGI REKAYASA MANUFAKTUR - MEDIA PEMBELAJARAN VOKASI
4. PLATE BENDING MACHINE - HYDRAULIC SYSTEM

Pembimbing
1. Drs. Abdul Qolik, M.pd
Lampiran Berkas
You must be logged in to get fulltext


UPT Perpustakaan UM
  • Berita

Tentang Kami

TIM IT Perpustakaan 2023

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS

Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik