UPT Perpustakaan UM

  • Beranda
  • Informasi
  • Repository UM
  • SIPADU UM
  • OPAC SIPADU

Pencarian Spesifik

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
No image available for this title

Tugas Akhir

Design and construction of a plastic shredder machine with a capacity of 10 kg/hour / ACMAD NAUFAL FADHLURROHMAN

Fadhlurrohman, Acmad Naufal - Nama Orang;

Abstrak
The increase in plastic consumption without proper waste management can be a serious problem especially on campus. State University of Malang as part of its Green Campus program requires an efficient and safe plastic waste processing solution. This research aims to design a 10 kg/hour plastic shredder with additional operator safety features to support plastic waste management on campus. The research method used is Research amp Development (Waruwu 2024) to support a systematic and measurable design process. This machine is designed with a single-shaft shredder-type cutting system uses an AC motor and is equipped with a hopper with a press an emergency stop system a speed controller and a reverse switch. The design results indicate that the machine is suitable and capable of shredding plastic with uniform results thanks to the presence of a screen. The configuration of a 2 HP motor with a 1 40 gearbox ratio and a 120 mm diameter and 6 mm thick blade is theoretically capable of shredding 1-liter PET plastic bottles with a thickness of 0.4 mm with a reasonable margin. Theoretically this research has been able to fulfill the design of a plastic shredder machine with a capacity of 10 kg/hour while still paying attention to technical parameters as well as comfort and safety for users.


Informasi Detail
DDC
-
Prodi
Universitas Negeri Malang. Program Studi Teknologi Rekayasa Manufaktur, 2025.
Deskripsi Fisik
xiii, 75 hlm. : ilus
Bahasa
No Reg
0110/TA/25
Edisi
Tugas Akhir (Diploma)--Universitas Negeri Malang. 2025
Subjek
1. MESIN SHREDDER PLASTIK - RANCANG BANGUN
2. PENGOLAHAN LIMBAH (WASTE MANAGEMENT) - GREEN CAMPUS
3. TEKNOLOGI REKAYASA MANUFAKTUR - DAUR ULANG PLASTIK
4. PLASTIC SHREDDER MACHINE - DESIGN AND CONSTRUCTION

Pembimbing
1. Didin Zakariya Lubis, S.pd, M.eng
Lampiran Berkas
You must be logged in to get fulltext


UPT Perpustakaan UM
  • Berita

Tentang Kami

TIM IT Perpustakaan 2023

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS

Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik