UPT Perpustakaan UM

  • Beranda
  • Informasi
  • Repository UM
  • SIPADU UM
  • OPAC SIPADU

Pencarian Spesifik

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
No image available for this title

Tugas Akhir

Analysis of the effect of temperature and holding time on hardness values in the annealing process of cane cutter knives (ss400 steel) / Ahmad Auva Ihab

Ihab, Ahmad Auva - Nama Orang;

Abstrak
In the sugarcane processing industry there are often problems when the milling season arrives one of which is in the machine Cane Cutter which functions as a sugarcane chopper consisting of various blade blades attached to the stalk (Holder) which is made of SS400 steel material. These blades play a crucial role in the process of cutting sugarcane before milling and their performance is greatly influenced by the mechanical properties of the material used. SS400 steel which is a low carbon steel has relatively low hardness and high ductility. However damage to the blade occurs Cane Cutter happens often. This study aims to analyze the effect of temperature variation and holding time in the annealing process on the hardness value of SS400 steel used as a cane cutter knife. The annealing process is one of the important processes in improving the mechanical properties of a material such as its hardness and ductility. In this study the cane cutter blade made of SS400 steel was given a heat annealing treatment with different temperatures and holding times. Based on the results of the heat treatment of annealing on ss400 steel using temperature variations of 750 deg C 775 deg C 800 deg C with each temperature variation given a holding time variation of 30 minutes 45 minutes 60 minutes. The lowest value was obtained at 800 deg C with a holding time of 60 minutes with an average hardness of 34.24 HRA and the highest hardness value at 750 deg C with a holding time of 30 minutes of 39.77 HRA.


Informasi Detail
DDC
-
Prodi
Universitas Negeri Malang. Program Studi Teknologi Rekayasa Manufaktur, 2025.
Deskripsi Fisik
x, 29 hlm. : ilus
Bahasa
No Reg
0122/TA/25
Edisi
Tugas Akhir (Diploma)--Universitas Negeri Malang. 2025
Subjek
1. BAJA KARBON RENDAH (SS400) - PERLAKUAN PANAS (HEAT TREATMENT)
2. ANNEALING (PROSES PELUNAKAN) - KEKERASAN MATERIAL (HARDNESS)
3. TEKNOLOGI REKAYASA MANUFAKTUR - METALURGI FISIK
4. LOW CARBON STEEL (SS400) - HEAT TREATMENT

Pembimbing
1. Didin Zakariya Lubis, S.pd, M.eng
Lampiran Berkas
You must be logged in to get fulltext


UPT Perpustakaan UM
  • Berita

Tentang Kami

TIM IT Perpustakaan 2023

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS

Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik