UPT Perpustakaan UM

  • Beranda
  • Informasi
  • Repository UM
  • SIPADU UM
  • OPAC SIPADU

Pencarian Spesifik

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
No image available for this title

Tugas Akhir

The effect of ss400 steel tempering temperature on cane cutter knives on the level of duty / FERDY WAHYU ADITYA

Aditya, Ferdy Wahyu - Nama Orang;

Abstrak
This study aimed to determine the effect of tempering temperature variations on the ductility of SS400 steel used as cane cutter blade material. The heat treatment process consisted of a hardening stage at 850 deg C with water as the coolant followed by tempering at various temperatures of 200 deg C 350 deg C and 600 deg C. A Charpy impact test was used to determine the amount of energy absorbed by the steel after tempering. The results showed that the tempering process significantly affected the ductility of SS400 steel. The untempered specimens had an average ductility of 1 401 J/mm sup2 . After tempering the ductility value increased at all temperature variations. The ductility value increased to 1 954 J/mm sup2 at 200 deg C 1 971 J/mm sup2 at 350 deg C and reached a peak of 2 001 J/mm sup2 at 600 deg C. This proves that the higher the tempering temperature the greater the energy the material can absorb up to a certain limit. Therefore a tempering treatment at 600 deg C is recommended to increase the ductility of SS400 steel making it more resistant to impact loads when used as a cane cutter blade.


Informasi Detail
DDC
-
Prodi
Universitas Negeri Malang. Program Studi Teknologi Rekayasa Manufaktur, 2025.
Deskripsi Fisik
ix, 46 hlm. : ilus
Bahasa
No Reg
0123/TA/25
Edisi
Tugas Akhir (Diploma)--Universitas Negeri Malang. 2025
Subjek
1. BAJA KARBON RENDAH (SS400) - PERLAKUAN PANAS (TEMPERING)
2. SIFAT MEKANIK LOGAM - KEULETAN (DUCTILITY)
3. TEKNOLOGI REKAYASA MANUFAKTUR - METALURGI FISIK
4. LOW CARBON STEEL (SS400) - HEAT TREATMENT (TEMPERING)

Pembimbing
1. Didin Zakariya Lubis, S.pd, M.eng
Lampiran Berkas
You must be logged in to get fulltext


UPT Perpustakaan UM
  • Berita

Tentang Kami

TIM IT Perpustakaan 2023

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS

Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik