Tugas Akhir
Arduino-based smart sliding roof design with independent plts energy source / Adam Ramadhani Prasetyawan
Abstrak
ABSTRACT Prasetyawan Adam 2025. Arduino-Based Smart Sliding Roof Design with Independent PLTS Energy Source. Final Project D4 Energy Generation Engineering Technology Faculty of Vocational Studies State University of Malang. Advisor Sujito S.T. M.T. Ph.D. Keyword Sliding Roof Automatic PLTS Weather Arduino Automatic sliding roofs are a technological innovation aimed at improving indoor environmental quality especially in homes with limited space and limited natural light. These intelligent sliding roof systems are designed to open and close automatically according to weather conditions improving air circulation and maximizing natural lighting within the home while reducing electricity consumption. This study designs an automatic sliding roof system based on an Arduino Uno microcontroller equipped with three main sensors a light sensor a rain sensor and an ESP32-CAM camera. This system uses decision tree logic to determine the open or close status of the roof and regulates the speed of the stepper motor through the TB6600 driver. Three sensor inputs are processed to produce output in the form of motor speed with categorization of weather conditions sunny cloudy overcast and rainy conditions no rain drizzle rain. The system is designed with two operating modes namely automatic and manual. In automatic mode the sensor will immediately trigger the action of opening or closing the roof. Meanwhile in manual mode the system only provides recommendations based on sensor readings and the user can make decisions via the confirmation button. System status and weather information are displayed on a 16x2 I2C LCD. The energy source for this system is not connected to the national electricity grid but uses a Solar Power Plant (PLTS) with a capacity of 20 Wp. Energy is stored in a 12V 9Ah battery through a PWM type Solar Charge Controller. The total energy consumption of the system is estimated at 44.88 Wh per day making the solar PV an efficient standalone solution. The research process includes field observation problem identification literature study system design prototyping testing and evaluation. The prototype sliding roof size is designed at 100 cm x 50 cm with a maximum opening of 50 cm. The light sensor functions based on changes in resistance to light intensity the rain sensor detects the presence of water on conductive surfaces and the ESP32-CAM processes RGB sky images to determine the weather. System testing was carried out through 27 scenarios of data combinations from the sensors. The test results show that the system is able to respond well to environmental changes in accordance with the applied decision tree logic. The motor speed is divided into three levels slow (400) normal (500) and fast (600) according to input conditions. All tests showed results in accordance with the plan. The conclusion of this study shows that the Arduino-based automatic sliding roof system supported by a self-sufficient solar power plant energy source can function effectively and efficiently in detecting weather conditions and executing roof drive commands as needed. This system can be applied in households to improve comfort and energy efficiency.