Tugas Akhir
Comparative analysis of the volume and cost of structural work of a 3-storey residential building between bim software autodesk revit and tekla structures (case study: luxury house project in sekarsuli, klaten utara, central java / Yudhis Ari Prihastyo
Abstrak
ABSTRACT Yudhis Ari Prihastyo. 2025. Comparative Analysis of Volume and Cost of 3-Storey Residential Building Structure Work Between Autodesk Revit BIM Software and Tekla Structures (Case Study Luxury House Project in Sekarsuli North Klaten Central Java). Final Project Civil Building Engineering and Maintenance Technology Study Program Faculty of Vocational Studies State University of Malang Advisor Drs. N. Bambang Revantoro S.T. M.T. Keywords BIM Autodesk Revit Tekla Structures Comparative Analysis Volume Cost The Indonesian construction industry still faces classic challenges of inaccuracies in volume calculation and cost estimation leading to budget overruns. This study aims to analyze the comparison of the accuracy of structural material volume calculations and cost estimates between two Building Information Modeling (BIM) software namely Autodesk Revit and Tekla Structures for a 3-story residential building project. The research method used was quantitative descriptive with a case study on the Luxury House project in Klaten. 3D modeling and quantity take-off were performed on both software using identical material and labor cost data. The results show differences between the two software. For concrete volume Tekla Structures yielded a larger calculation by 0.55% (161.90 m sup3 vs. 161.01 m sup3 in Revit). For rebar volume Autodesk Revit produced a larger calculation by 4.27% (24 595.48 kg vs. 23 587.40 kg in Tekla). This difference directly impacted the cost estimates. The concrete cost from Tekla was higher by IDR 1 697 057.06 while the rebar cost from Revit was higher by IDR 12 084 661.42.