UPT Perpustakaan UM

  • Beranda
  • Informasi
  • Repository UM
  • SIPADU UM
  • OPAC SIPADU

Pencarian Spesifik

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
No image available for this title

Tesis

Peningkatan kemampuan keterampilan motorik siswa pada kompetensi merakit kusen kayu melalui siklus pembelajaran latihan membuat sambungan kayu di SMK Negeri 3 Boyolangu-Tulungagung, SMK Negeri 1 Kediri, dan SMK Negeri 1 Blitar / Dwi Kukuh Wahonohadi

Wahonoadi, Dwi Kukuh - Nama Orang;

Abstrak
Based on the students achievement data of class II at first semester in 2006/2007 the timber frame assemble competence at SMK N 3 Boyolangu Tu-lungagung SMK N 1 Kediri and SMK N 1 Blitar are low. Learning problem can be observed through the student s marks and it s average. On the other hand teachers realized the students weakness when finishing the wood frame assembling especially students skills in making the wood joints. The research design used is classroom action research. Action procedures are formed in four cycles (a) cycle 1 learning how to make the joint pen (b) cycle 2 learning of making the joint cross drill (c) cycle 3 learning the exercise of birds tail joint and (d) cycle 4 learning how to assemble a wood frame. The results showed that (a) at the end of cycle 1 it was found that SMK N 3 Boyolangu Tulungagung obtained the average of seven point twenty four (7.24) there were 24 students (75%) had been competent and eight students (25%) had not been competent while the SMK N 1 Kediri had the average of seven point twenty five (7.25) there were 20 students (64.5 %) had been competent and 11 students (35.5%) had not been competent. On the other hand SMK N 1 Blitar had the average of seven point nineteen (7.19) there were 25 students (71.4%) had been competent and 10 students (28.4%) had not been competent. Further more the remedial teaching how to make a joint pen was conducted so that all students were competent (b) at the end of cycle 2 SMK N 3 Boyolangu Tulungagung obtained the average of seven point thirty six (7.36) there were 27 students (84.4%) had been competent and five [1]students (15.6 %) had not been competent while the SMK N 1 Kediri gained the average of seven point thirty two (7.32) there were 23 students (74.2%) had been competent and eight students (25.8%) had not been competent. On the other hand SMK N 1 Blitar obtained the average of seven point thirty five (7.35) there were 27 students (77.1%) had been competent and 10 students (22.9%) had not been competent. Next the remedial teaching how to make notch cross joint was conducted so that all students were competent (c) at the end of cycle 3 SMK N 3 Boyolangu Tulungagung achieved the average of seven point forty nine (7.49) there were 30 students (91.8%) had been competent and two students (8.2 %) had not been competent. While the SMK N 1 Kediri had average of seven point thirty eight (7.38) there were 28 students (90.3%) had been competent and three students (9.7%) had not been competent. On the other hand the SMK N 1 Blitar obtained the average of seven point forty one (7.41) there were 32 students (91.4%) had been competent and three students (8.6%) had not been competent. Further the remedial teaching of how to make the notch bird tail joint was conducted so that all students were competent to make this joint and (d) at the end of cycle 4 it was found that the SMK N 3 Boyolangu Tulungagung achieved the average of seven point eighty five (7.85) SMK N 1 Kediri obtained the average of seven point eighty nine (7.89) and SMK N 1 Blitar gained the average of seven point seventy six (7.76). It showed that each student received grades is over than or equals seven ( 8805 7.00) (100%) and it means that all students were competent or were successful in learning. This exercise shows that learning to make the most of wood joint can enhance students skills competence in assembling wood frame in SMK N 3 Boyolangu Tulungagung SMK N 1 Kediri and SMK N 1 Blitar.


Informasi Detail
DDC
Rt 694.1076 WAH p
Prodi
Universitas Negeri Malang. Program Studi Pendidikan Kejuruan, 2010.
Deskripsi Fisik
xii, 368 + [5] lembar : il. , tab. ; 30 cm.
Bahasa
Indonesia
No Reg
00977/KI/10
Edisi
Tesis (Pascasarjana)--Universitas Negeri Malang. 2010
Subjek
1. KAYU, PERTUKANGAN
Pembimbing
1. ACHMAD TUTJIK ; 2. BAMBANG WIDARTA
Lampiran Berkas
You must be logged in to get fulltext


UPT Perpustakaan UM
  • Berita

Tentang Kami

TIM IT Perpustakaan 2023

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS

Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik